| |
Drums of KLEENOX CRYSTALS should be stored out of the
sun and away from heat. Crystals must be stored as to
avoid moisture pick-up. The container should be kept
tightly closed in a dry place. An inventory turnover
rate of two to three months is recommended to minimize
caking. |
|
| |
- Be sure the area is clean
before fluxing.
- If the solder fails to flow or the metal turns dark, you are using too much heat. Allow the metal to cool, reflux the area and adjust the flame lower or hold the torch further from the work.
- If the solder fails to flow or the metal turns dark, you are using too much heat. Allow the metal to cool, reflux the area and adjust the flame lower or hold the torch further from the work.
- ZERO-ZINC fluxes perform better with high tin solders than high lead solders.
|
|
